Our today stop is an italian product again - from Seneca. Z-8AI is a 8-CH analog input module / RS485. The Z-8AI is used to interface analog inputs (Voltage or current, also
with bipolar range) with Modbus system. The modules is able to supply
all 8 current loops at the same time, this is very useful for 2-wire
sensors because the wiring does not need an external power supply. It’s a
ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way
galvanic isolation among Power supply // input // RS485 circuits assures
the integrity of your datas.You have to be familiar with the Modbus protocol basics at least. Anyways, ask if there is something unclear. You can reach me in the Contacts page!
| Description: | 8-CH analog input module / RS485 |
| Power Supply: | 10..40 Vdc, 19..28 Vac |
| Auxiliary Sypply: | Up to 8 current loop |
| Isolation: | 1.500 Vac |
| Input: | Nr 8-CH voltage / current signal type |
| Range: | ±2,5 Vdc, ±5 Vdc, ±10 Vdc, ± 20 mA |
| Resolution: | 16 bit |
| Communication: | RS485 2 wires, ModBUS RTU slave protocolo, max 64 nodes |
| Settings: | DIP switch, software |
No comments:
Post a Comment